一、加工裝配合同
合同號：_______________
簽訂日期：_____________
簽約地：_______________
甲方（加工裝配方）：_______________公司
地址：_________________________________
電話：___________傳真：____________電子郵箱：__________
乙方（來料、來件方）：（境外）________有限公司
地址：_________________________________
電話：___________傳真：____________電子郵箱：__________
雙方在遵守中華人民共和國法律、法規的前提下，本著本等互利的原則，就來料加工__________進行了充分協商，一致達成如下合同條款：
一、雙方責任
1．甲方責任：
（1）提供有上蓋之廠房________平方米，無上蓋場地________平方米，工廠管理人員________名，生產工人________名、開業后________月增至________名。在合同期內代乙方加工生產上述產品，加工成品后交回乙方復出。
（2）提供現有水、電設備供加工生產之用，如需新安裝水、電設施，其費用由乙方支付。
（3）辦理來料加工、裝配有關業務的進出口手續及對工廠實行行政、財務等管理，不得把工作以任何形式承包給任何單位和個人經營。
2．乙方責任：
（1）不作價提供加工上述產品及裝修廠房和建造________平方米簡易廠房所需的設備材料（詳見清單），分多批運抵甲方工廠，設備總值約________萬元。
（2）不作價提供加工上述產品所需的原料、輔料和包裝物料，具體數量、規格在各份具體生產加工合同中訂明。
（3）工人如因工作不力（含工廠管理人員），經教育無效者，乙方有權向甲方提出調換，但禁止非法搜查甲方工廠工人的身體。
二、加工數量
第一年加工上述產品，加工費約_____萬元，從第二年開始的產量，應在前一年的基礎上有所增加，具體數量應在生產合同中訂明。
三、作價原則和工繳費
1．試產（培訓）期為二個月，在試產期內，工人每人每月工繳費暫定為_____元，每月工作_____日，每天_____小時。
2．試產期滿后，采取按件計算方式，在堅持互利原則的基礎上、雙方應根據加工的品種、規格、款式和工藝繁簡不同進行定價，并在生產加工合同中訂明為確保工人的合理收入，工繳費平均每人每月不低于_____元。需要加班時，加班費另計，但每個工人每天加班時間最長不得超過_____小時。
3．甲方工人生產消耗的水、電費由乙方負責。
4．每月乙方支付甲方_____元，作為工作管理費。
四、損耗率
1．試產期內的消耗率，實報實銷。
2．試產期后的損耗率，由雙方商定，并在生產加工合同中訂明。
五、來料和交貨期
1．乙方按生產合同的加工量，按月提供足夠數量的原輔材料和包裝物料。為使甲方工廠能正常生產，乙方必須在每批產品開始加工前____天，將所需的原材料和包裝物料運抵甲方工廠。除因人力不可抗拒之原因外，乙方來料不足，造成甲方工廠每月生產不足_____天，停工天數累計不得超過四天，否則，乙方應按 在廠工人以停工天數計，每人每天補助生活費_____元，支付給甲方工廠。
2．為使乙方能開展正常的業務活動，甲方應向乙方按商定的交貨期，按時、按質、按量交貨。如非人力不可抗拒原因，甲方不按時、按質、按量交貨，造成乙方的經濟損失，甲方應負賠償之責任，賠償數額可在具體的生產加工合同中訂明。
3．由乙方提供的機械、通風、照明等設備及原輔材料、包裝物料，在甲方工廠由雙方進行交收登記，建立帳冊。甲方工廠加工后的成品，在甲方工廠經乙方驗收起運后，甲方不負產品規格、質量、短缺等任何責任。
六、結匯形式
工繳費及工人管理費每月結算一次，以D/P即期結匯或支票方式結匯，由甲方工廠會同（____政府授權的處理來料加工事務并具有外貿經營權的）_______貿易公司(下稱授權貿易公司)開具發票后，通過中國銀行（深圳分行）向乙方在香港開戶的銀行（____銀行。帳號_____）辦理。乙方超過_____天仍未付款給甲方，則按逾期天數，以當時香港銀行利息一并付給甲方。乙方連續_____個月不結匯，甲方有權采取停止出貨或其它措施。
七、勞動保護及運輸與保險
1．工廠應做好勞動保護及安全工作，完善防塵、防煙、防毒設施，廠房保持通風光亮，內外環境衛生整潔，對有污染性項目，須經市環保部門批準，方能立項經營。
2．乙方提供的機械、通風、照明設備、原輔材料、包裝物件及甲方工廠加工后的成品運輸費用，均由乙方負責。
3．原輔材料、包裝物料的運進，成品運出及加工期間存放的機械設備、原料和包裝物料及操作機械的工人，均由乙方向_____保險公司投保。
八、技術交流
在設備運抵甲方工廠后，乙方應盡快派出人員進行安裝，甲方派出人員進行協助。從試產期開始，乙方應派出技術人員到甲方工廠進行技術培訓，直到工人能基本掌握生產技術，進行正常生產時為止。乙方技術人員的工資及一切費用由 乙方負責，甲方提供生活上的方便。
九、合同期限
本合同經批準簽訂后，乙方須將商業登記及銀行資信證明書交甲方辦理營業 執照經海關備案生效。有效期為_____年，即從____年___月___ 日至____年__月__日。如要提前終止或延長本合同，須在三個月前通知對方，并經雙方協商處理終止或延長合同事宜。某方單獨提前終止合同，要負責補償對方的經濟損失。補償的辦法，根據終止合同前半年內的每月平均工繳費為準，補償兩個月的工繳費總額給對方。
合同期滿后，不動資產（如廠房、宿舍）歸甲方所有，由乙方不作價提供的可動產（如機械、車輛、通風設備）歸乙方所有，并按海關和有關規定及時辦理核銷手續。
雙方同意，在本合同經批準簽訂后_____天內，乙方向甲方預付_____元，作為履約保證金，從甲方收到履約金之日起_____個月內，乙方仍不投產開業，履約保證金即無條件歸甲方所有，同時，甲方有權廢約。如乙方能按時投產開業，該履約保證金可作工繳費抵付給甲方。
十、仲裁
凡因本合同引起的或與本合同有關（包括任一生產加工合同）的任何爭議，應通過友好協商解決，協商不能解決，均應提交中國國際經濟貿易仲裁委員會深圳分會，按照申請仲裁時該會施行有效的仲裁規則進行仲裁。仲裁裁決是終局的,對雙方均有約束力。
十一、語言
本合同以英文和中文書就，兩種文本具有同等效力。但在對其解釋產生異議時，以中文文本為準。
十二、合同的份數和修訂
本合同正本一式五份，甲、乙雙方、海關、車管所、政府授權的處理來料加工事務并有外貿經營權的_____公司各一份，副本若干份，均具有同等效力。
本合同有如未盡事宜，雙方可隨時補充或修改，并報政府有關部門批準實施。
甲方：_______________ 乙 方：_________________
授權代表：_____________授權代表：_______________
授權貿易公司：______________________________
代表(簽字）：______________________________
CONTRACT FOR PROCESSING & ASSEMBLY
Contract No: ________________
Conclusion Date: ____________
Conclusion Place: ___________
Party A: __________ Company (Party of Processing or Assembling)
Legal Address: ________________________________
Tel: _______________ Fax: ______________ E-mail: _______________
Party B:___________ Ltd. (Party of Supplying Materials and Parts)
Legal Address: ________________________________
Tel: _______________; Fax: ______________; E-mail: _______________
Party A and Party B, according to the laws and policies of the People's Republic of China and the relevant regulations and the principles of equality and mutual benefit, have held discussions relating to the processing and assembling of (plastic toy products) and have reached agreement on the following contractual clauses:
1. Responsibilities
(1)Responsibilities of Party A
1) Party A shall provide factory space consisting of _____ square metres, field of _____ square metres without covering, _____ factory management person and _____ workers for the first phase. The number of workers shall be increased to _____ twelve months after operation. Within the Contract term, Party A shall process the products for party B which shall be re-exproted to _____.
2) The water supply and utility equipment required for processing shall be provided by Party A. If additional installations of water and electric facilities are required, the expenses thereof shall be borne by Party B.
3) Party A shall arrange all the necessary import and export approvals required for processing and assembly and provide administration and accounting management for the processing plant. Party A cannot assign Party A's responsibilities to any other party or individual in any way.
(2) Responsibilities of Party B
1) To provide the equipment with the total value of _____.
2) To provide the raw materials, indirect materials and packaging materials for processing the products. Quantities and specifications are to be specified in separate processing contracts.
3) In the event any personnel, including management shows substandard performance and makes no improvement after retraining, Party B shall have the right to request Party A to replace such persons. However, any physical search of the workers shall be regarded as illegal and prohibited.
2. Quantity of Products
During the first year, the total processing fee shall amount to _____. From the second year, the quantity shall be increased. Details shall be specified in separate processing contracts.
3. Price & Salary
(1) The trial production (including training) period shall be _____. During such period, the workers shall be paid _____ per month on the basis of _____ working days per month and _____ working hours per day.
(2) After the trial production period, the worker's payment shall be calculated according to actual production quantities. On the basis of mutual benefit, both parties shall consider the processing fee, which shall be specified in separate processing contracts, according to different kinds of products, specifications, styles and engineering procedures. In order to ensure the reasonable income of the workers, the worker's monthly salary shall be maintained no lower than _____. If overtime work is required, payment shall be calculated separately. However, overtime shall not exceed _____ hours a day.
(3) Expenses for water and electricity in Party A's plant shall be borne by Party B.
(4) Every month Party B shall pay _____ to Party A for management expenses.
4. Proportion Products Damaged
(1) During the trial production period, Party B shall absorb the cost of products damaged.
(2) After the trial production period, the proportion of damaged products shall be mutually considered and decided by both parties and specified in separate processing contracts.
5. Shipment of Raw Materials & Finished Products
(1) Every month, Party B shall provide sufficient raw materials and packaging materials according to the contracted processing volume. To ensure the normal production of Party A's plant, Party B shall ship such materials to the plant_____ days before the production of each lot of products. Except for reason of force majeure, the plant shall operate for more than _____ days in a month. In case production is held up for _____ days to insufficient supply of raw materials, Party B shall calculate the actual days when production is shut down and pay to Party A the workers' living expenses at the rate of _____ per person per day.
(2) To ensure the normal operation of Party B's business activities, Party A shall deliver the finished products to Party B in accordance with the time of delivery, quality and quantity. Except for reason of force majeure, in case losses to Party B are caused due to Party A's failure to make delivery as mentioned above, Party A shall be responsible for the compensation. Details of such compensation shall be mutually agreed upon in separate processing contracts.
(3) Both parties shall mutually inspect and document the equipment and materials provided by Party B, such as machinery, ventilation and lighting equipment and raw materials. After the finished products are inspected and shipped from the plant by Party B, Party A shall be free of any responsibility in regard to specifications, quality and quantity, etc.
6. Method of Payment
Payment of workers' salary and management fee shall be settled once a month by D/P, which shall be conducted through Bank of China _________Branch by Party B's bank in _____ (_____Bank, Account NO.______) in accordance with the invoices issued by Party A and a Trade Company (authorized by the local government to be in charge of affairs of processing and assembly and with foreign trade authority, hereinafter referred to as the Authorized Trade Company). In case Party B's payment is delayed for _____ days, Party B shall be responsible for the interest incurred according to the bank's interest rate; in case payment is not settled for _____ consecutive months, Party A shall have the right to suspend delivery of the finished products or take other measures.
7. Labour Protection & Insurance
(1) The plant shall take safety measures and protect the workers from dirt, smoke and poisonous materials. The factory shall be maintained ventilated and bright, and the surroundings clean and tidy.
(2) The transportation expenses for the machinery, ventilation and lighting equipment, raw materials, indirect materials, packaging materials and the finished products shall be paid for by Party B.
(3) All insurance for the transportation and storage of the above materials, machinery and equipment and coverage of the workers operating the machinery shall be arranged through the _____ Insurance Company of.
8. Technical Exchange
After the arrival of the equipment in the plant, Party B shall dispatch personnel to install such equipment, while Party A shall arrange personnel to assist the installation. When the trial production begins, Party B shall provide technical personnel to carry out the training until the workers have mastered the technology and the production operates normally. Party B shall be responsible for the technical personnel's salary and all related expenses, and Party A shall provide daily necessities.
9. Contract Term
After this contract is signed and approved, Party B shall present to Party A its Commercial Registration and Bank Credit Certificate for Party A to arrange business licence and Customs Registration. The term of this contract shall be three years, e.g. from______ to________. If either party wishes to terminate in advance or extend the contract, the responsible party shall inform the other party three months in advance so that both parties can discuss and settle such a termination or extension. If either party terminates the contact before the term expires, the responsible party shall compensate the other party for the losses in such case, the responsible party shall pay the other party as compensation the amount of _____ times the monthly processing fee. The fee will be based on the average monthly fee of the previous _____ months.
After the contract term expires, the real estate such as the factory building and dormitory building shall return to Party A and the machinery and equipment delivered by Party b shall be returned to Party B. Customs clearance procedures shall be gone through according to relevant regulations.
Both parties agree that, within _____ days after the contract is signed and approved, Party B shall pay Party A the amount of _____ as its guarantee to carry out the contract. If, within _____ months after Party A's receipt of such amount, Party B still cannot arrange to start production, the amount shall be forfeited to Party A unconditionally and Party A shall have the right to cancel the contract. If Party B can start production on time, the amount will be deducted from the processing fee.
10. Arbitration
Any dispute arising from or in connection with this Contract (and including all the separate processing contracts) shall be settled through amicable negotiation. Should no settlement be reached through negotiation, the case shall then be submitted to the China International Economic and Trade Arbitration Commission (CIETAC) ,Shenzhen Commission for arbitration that shall be conducted in Shenzhen in accordance with the CIETAC's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon parties.
11. Language
The present contract is drawn in Chinese and English as well, both texts being equally authentic. In case of any divergence of interpretation, the Chinese text shall prevail.
12. Amendment and Copies
This contact is made out in _____ copies respectively held by the Parties, the Customs, Vehicle Authority and the Authorized Trade Company. They shall have the same force.
If there are other issues not covered in the contract, both parties can discuss to supplement or amend the contract and submit the results to relevant departments for approval.
Party A: _____________________ Party B:________________________
Authorized Representative: _____Authorized Representative:________
The Authorized Trade Company:_____________________